Using The Appliance With Climate App; Troubleshooting; Cleaning & Maintenance - Princess Smart Air Conditioner 9000 Manual De Usuario

USING THE APPLIANCE WITH CLIMATE APP

The appliance can be used manually with its built-in controls, remote
control or you can use a smart phone or voice to control it. Before
you begin, ensure the Homewizard Climate app is downloaded. The
Homewizard Climate app is available on Android and iOS.
Pair your appliance to HomeWizard Climate app
• Make sure the appliance is powered.
• Open HomeWizard Climate APP.
• Create an account or if you already have a HomeWizard account,
please log in using those details.
• Click "Add new Climate Device" to add a new device.
• Select the device you want to connect.
• Follow the instructions on the app to connect the appliance.
CLEANING MAINTENANCE
• Before cleaning, disconnect the unit from any electric supply
outlet.
• First clean the surface with a neutral detergent and wet cloth, and
then wipe it with a dry cloth.
• Do not use gasoline or other chemicals to clean the unit.
• Do not wash the unit directly.
Air filter
• The air filter should be cleaned once every two weeks.
• Open the air inlet grille and take off air filter.
• Clean the air filter with neutral detergent in lukewarm 40°C water
and allow to dry (not in direct sunlight).
• Re-install the air filter into the inlet grille.

TROUBLESHOOTING

Troubles Possible Causes
The unit does not • Water full
start when pressing indicator lamp
power button. blinks and water
tank is full.
• Room
temperature is
higher than the
setting
temperature.
(Electric heating
mode)
• Room
temperature is
lower that the
setting
temperature.
(Cooling mode)
Instruction manual
EN
Suggested
Remedies
• Drain the water
out of the water
tank.
• Adjust the
temperature.
11