Before The First Use; Using The On Device Buttons - Princess Smart Air Conditioner 9000 Manual De Usuario

Instruction manual
1 Receiving signal
2 Cooling
3 Dehumidifying
4 Fan
5 Auto swing
6 Timing
7 Timer on/off
8 Sleep mode
9 Fan speed
10 Temperature display
8
• 2xAAA size batteries are required.
• Ensure batteries are inserted in the correct direction.
• When replacing, ensure both batteries are changed
simultaneously.
• Press the corresponding buttons as explained in the control panel
part to operate the fan.

BEFORE THE FIRST USE

Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose and adjust the window position well.
• Insert the power cord into a grounded AC220~240V/50Hz socket.
• Press the power button to turn on the air-conditioner.
• Check whether the exhaust hose has been mounted properly.
• Set the temperature range: 16°C-31°C.
• When using functions on cooling and dehumidifying, allow at least
3 minutes between powering off and powering on.

USING THE ON DEVICE BUTTONS

Cooling operation
• Press the "Mode" button till the "Cool" icon appears.
• Press the + <Temperature up> or - <Temperature down> button
to select a desired room temperature.
• Allow around 5 minutes for the cooling to start.
• Press the "Fan speed" button to adjust airflow speed.
Dehumidifying operation
• Press the "Mode" button until the "Dehumidify" icon appears.