THOMSON THVC213120C Manual De Instrucciones página 31

Tips: Choose location close to power outlet. Locate point high enough on
wall to allow wand and power brush to hand freely. Place wall mount
against wall and use pencil to mark drill holes. Drill holes (with 1/4"bit) and
insert drywall anchors. Insert screws through holes on mount and tighten until
firmly attached.
Drywall anchors
Slide wand into main body until it clicks.
-
- Push wand into power brush until it clicks.
Accessories can be connected with wand When cleaning high
-
position.
How to connect accessories?
EN-9
Screws