Cequent Performance Products 36642 Instrucciones De Instalación página 4

1. Lower Muffler - NOTE: A spray of lubricant on rubber hangers
makes them slide off metal pins more easily.
a) Remove the (2) screws from the bottom of the rear fascia using a
T15 torxbit.
1. NOTE: Be careful that exhaust is supported before removing rubber
hangers.
c) Remove the rubber isolator from hanger in front of the muffler.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
1. b) Remove the bolts (2 per bracket) from the rear exhaust hanger
brackets using a 15mm socket. Then remove the bracket from the
hanger tabs.
1. d) Lower the exhaust (1) side at a time by pulling on the rear fascia.
Sheet 4 of 18 36642NP 4-7-17 Rev. A