Checking For Leaks; Adjusting The Temperature - Pegasus 873W-3501 Guía De Instalación Y Cuidado

Installation (continued)
12

Checking for leaks

□
Turn the handle (F) to the full on mixed position.
□
When the valve body (D) is turned on, water
normally ows through the tub spout (J). To
activate the shower, turn the valve on and pull
the knob (1) up. Hold the knob (1) until the water
ows continuously from the shower head (C).
Check for leaks.
□
Shut off the water at the faucet and supply lines.
1
J

Adjusting the Temperature

1
Removing the handle, sleeve
and inverter
□
Unscrew the set screw (G) from the handle (F),
and then remove the handle (F) from the valve
body (D).
□
Unscrew the sleeve (1) from the valve body (D).
□
Unscrew the screw (2) from the inverter (3),
and then remove the inverter (3) from the
valve body (D).
UP
FOR
SHOWER
C
J
1
F
G
12
F
3
2
D
D