Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions 05200-3884-01
This document must be used as a complement to the general instructions of the HighBay 05***.
1.
Connection scheme for regulation
MAINS CONNECTION (AC220-240V 50/60HZ)
(see general instructions to connect ACL=L, ACN=N y GND= Ground by the connection block defined)
DIMMING CONNECTION TO 0/1-10V (05200-3884-01)
Connection block is not supplied with the luminaire.
The authorized installer must realice the electrical connection by using a connection block with 2 poles plus 1 groung with 1WAY IN + 1 WAY OUT,
IP 65 protection, which meets EN 60998 and it must hace capacity to 1.5mm²/10A/230V..
NOTE: It is IMPORTANT to remind that the 12V cable must not be connected to any other cable.
Publicidad
