LIFEtool SOLUTIONS IntegraMouse Plus Instrucciones De Empleo página 38

Recommended separation distances between portable and mobile RF communications
equipment and the IntegraMouse Plus and its accessories
The IntegraMouse Plus and its accessories are intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled.The customer or the user of the IntegraMouse Plus and its accessories can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the IntegraMouse Plus and its accessories as recommended below, according to the maximum output power
of the communications equipment.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance can be determined
using the equation applicable to the frequency of the transmitter, where P is the maximum outputpower rating of the transmitter
in watts (W) according to the transmitter manufacturer.
NOTE 1 An additional factor of 10/3 is used in calculating the recommended separation distance for transmitters in the ISM
frequency bands between 80 MHz and 2,5 GHz to decrease the likelihood that mobile/portable communications equipment
could cause interference if it is inadvertently brought into patient areas.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1,2√P
0,12
0,38
1,2
3,8
12
M
80 MHz to 800 MHz
d = 1,2√P
0,12
0,38
1,2
3,8
12
800 MHz to 2,5 GHz
d = 2,3√P
0,23
0,73
2,3
7,3
23
38