Product Maintenance - Infiniton CLEANER 1020 Manual De Usuario

Product Maintenance

Main Brush, Side Brushes and Cleaning Mop
Clean the main brush, side brushes and cleaning mop when they are dirty and replace if they are
damaged.
* Push the two tabs on the main brush cover to remove the cover, then remove the main brush.
Dust Bin and Filter
Clean and empty dust bin after each use, steps are as shown in below figures.
O,
�
.. . , .
* After taking out dust bin, check whether there is foreign matter stuck in suck passage and clean it.
* Wash primary filter after 15-30 days' use. lnstall primary filters when it is dry.
* Do not wash High-performance filter. And replace it after use for 6 months at maximum.
Cliff sensors and auto charging pins
Slightly clean the sensor window and auto charging pins with a soft dry cloth as shown in below
figures.
* Charge connecting points on charging home base need to clean if dirty.
(J
�
,S/j;-,
1111
U
�
2
'-
º
�
g
3
6
119