Introduction; Symbols; Safety; Intended Use - Renfert Waxlectric light I Manual De Instrucciones

1

Introduction

We are pleased with your decision to purchase the Waxlectric light I or Waxlectric light II. This device sets
a new standard with regard to functionality, performance and safety.
1.1

Symbols

Danger!
This indicates a direct risk of injury. Consult accompanying documents!
Electrical current
This indicates a risk of hazard due to an electrical current.
Attention
Hot surfaces.
Attention
Disregarding this warning may result in damage to equipment.
Notice
This provides the operator with useful information to improve and ease use.
Only intended for indoor use.
Observe the operating instructions.
The device complies with the requirements of the applicable EU directives.
The device is subject to the EU directive 2002/96/EG (WEEE directive).
List, particular attention should be paid
• List
- List
Other symbols are explained as they occur.
2

Safety

2.1

Intended Use

The Waxlectric light is an electronically controlled wax knife, suitable for practically all modelling and wax-
ing-up applications. It is available in either a one- or a two-channel version. The operating temperature
the temperature too high, as some waxes are very sensitive to overheating.
2.2

Improper Use

Only spare parts and accessories supplied or authorized by Renfert GmbH may be used with this prod-
uct. If other spare parts or accessories are used, this could have a detrimental effect on the safety of the
device, increase the risk of serious injury and lead to damage to the environment or the device itself.
2.3

Ambient Conditions for Safe Operation

• Indoors
• Up to an altitude of 2,000 m above sea level,
•
•
•
• Under contamination level 2 conditions,
• Under over-voltage category II conditions.
- 3 -
EN
-