Statement - bestdent 98705 Manual De Instrucciones

Recommended separation distances between portable and mobile RF communications
The model Bestled is intented for use in electromagnetic environment in which radiated RF
disturbances is controlled. The customer or the user of the model Bestled can help prevent
electromagnetic interference by maintaining a minium distance between portable and mobile
RF communications equipment (transmitters) and the model Bestled as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W.
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) accordable
to the transmitter manufacturer.
NOTE 1: At 80MHz and 800 MHz. the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.

21. Statement

All rights of modifying the product are reserved to the manufacturer without further notice. The
pictures are only for reference. The final interpretation rights belong to GUILIN WOODPECKER
MEDICAL INSTRUMENT CO., LTD.
The industrial design, inner structure, etc, have claimed for several patents by WOODPECKER,
any copy or fake product must take legal responsibilities.
Guilin Woodpecker Medical
Instrument Co.,Ltd
Information Industrial Park,
National High Tech Zone
Guilin, Guangxi 541004 P.R.China
equipment and the model Bestled.
Separation distance to according to frequency of transmitter
150 kHz to 80MHz
d=1,2xP ½
0,12
0,38
1,2
3,8
12
Mednet EC-Rep GmbH
Borkstrasse 10
48163 Muenster- Germany
80MHz to 800 MHz
d=1,2 xP ½
0,12
0,38
1,2
3,8
12
29
800MHz to 2,5GHz
d=2,3 xP ½
0,23
0,73
2,3
7,3
23
Scan and Login Website
for more information