DETAILED PLANNING DIMENSION
AMANA
FRONT LOAD WASHER WITH LARGE CAPACITY - 4.3 cu ft
®
All Dimensions show recommended spacing allowed, except for closet door ventilation openings which are minimum required.
This washer has been tested for installation with spacing of 0" (0 mm) clearance on the sides. Consider allowing more space for ease
of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and floor moldings. Add spacing
of 1" (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings
in door are required.
*For additional details (or information) specific to your model, refer to your Quick Start Guide.
CUSTOM UNDER COUNTER INSTALLATION
RECESSED AREA OR CLOSET INSTALLATION
NOTE: All 27" wide washers should have 19" clearance, while all 29" wide washers should have 22" clearance
IMPORTANT: Dimensional specifications are provided for planning purposes only.
1"
(25 mm)
3"
(76 mm)
48 in
2
(310 cm
)
2
24 in
2
3"
(155 cm
)
2
(76 mm)
0.25"
(5 mm)
39"
minimum
(991 mm)
1"
(25 mm)
27"
(686 mm)
1"
(25 mm)
1"
1"
(25 mm)
(25 mm)
(25 mm)
1"
.
5 of 15