For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the light cover is properly positioned on vehicle.
• Clean only with mild soap and dry with a clean cloth or air dry.
• NOTE: PROFESSIONAL INSTALLATION IS RECOMMENDED.
Contents
NOTE: Actual product may vary from illustration. Logo should face exterior of vehicle.
Installation Steps
Align light cover with light fixture opening.
1
NOTE: It may be necessary to use a screwdriver to pry the clips on each end slightly wider to achieve optimal fit.
Congratulations!
You have purchased one of the many quality Lund™ branded products offered by Lund International. We take the
utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made
every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
™
Installation Instructions
Bullbar Light Cover
NOTE: Actual application may vary slightly from illustrations.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2015 Lund International, Inc. All rights reserved.
Lund
, the Lund
logo and Catch It
™
™
Snap light cover in place by pressing firmly on clips
2
NOTE: Logo should face exterior of vehicle.
are trademarks of Lund International, Inc.
™
Page 1 of 1
I - Sheet Number BLC01 Rev.B
located on each end.