Congratulations!
You have purchased one of many Lund branded quality parts offered by Lund
®
International, Inc. We take the utmost pride in our products and want you to enjoy years of
satisfaction from your investment. We have made every effort to ensure that your product is
top quality in terms of fit, durability, finish and ease of installation.
Lund International, Lund Accessories Division
775 Tipton Industrial Drive, Building 2, Suite F
Lawrenceville, GA 30045
800-328-5863 Fax 800-782-5448 Visit us at lundinternational.com
© 2004 Lund International, Inc. All rights reserved.
Lund and the Lund
logo are trademarks of Lund International, Inc.
®
®
®
4 of 4
I-1002
Rev. C
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Service at
1-800-328-5863.
Important Safety Information
Be sure to wear safety glasses while installing the shield.
Use caution when working with the drill or the punch.
Contents
Hex Key
Tools Required
Preparation Before Painting / Installation
Please check fit of parts before painting as we will not accept the return of modified or painted parts.
We will not assume any responsibility for parts painted in error. Review the Warranty Card
enclosed with the product before you install the product.
Care and Cleaning
1.
Avoid the use of automatic "brush-style" car washes.
2.
Do not use cleaning solvents of any kind.
3.
Wash only with mild soap & dry with a clean cloth.
4.
Do not pull on shield to close hood.
Installation Instruction
®
Interceptor Avenger
TM
Wrap Bug Shield
CAUTION
!
PRECAUCIÓN
ATTENTION
A
Hood Shield
Urethane strips
B
E
F
X8
Dual-lock Pads
X2
X2
Socket set screw
Expandable fasteners
Page 1 of 4
I-1002
Rev. C
TM
C
X2
X2
E-Clips
D
G