LUND Interceptor Avenger Instrucciones De Instalación

Care and Cleaning
Do not use cleaning solvents of any kind.
Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of many Lund branded quality parts offered by Lund
®
International, Inc. We take the utmost pride in our products and want you to enjoy years of
satisfaction from your investment. We have made every effort to ensure that your product is
top quality in terms of fit, durability, finish and ease of installation.
Lund International, Lund Accessories Division
775 Tipton Industrial Drive, Building 2, Suite F
Lawrenceville, GA 30045
800-328-5863  Fax 800-782-5448  Visit us at lundinternational.com
© 2004 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
®
Page 4 of 4
I-794
Rev. C
For proper installation and best possible fit, please read all instructions BEFORE you begin.
Review the Warranty Card enclosed with this product BEFORE installation of product.
For technical assistance or to obtain missing parts, please call Customer Service at
1-800-328-5863.
Important Safety Information
To avoid risk of personal injury or property damage:
Wear safety glasses while installing the Hood Shield.
Do not use automatic "brush-style" car washes.
Do not pull on shield to close hood.
Routinely check security of fasteners.
Check clearances on vehicle.
Use caution when working with the drill or the punch.
Contents
Tools Required
Preparation Before Painting / Installation
Please check fit of parts before painting as we will not accept the return of modified or painted parts.
We will notassume any responsibility for parts painted in error. Review the Warranty Card
enclosed with the product before you install the product.
Installation Instruction
®
Interceptor Avenger
TM
Wrap Bug Shield
CAUTION
!
PRECAUCIÓN
ATTENTION
Washer Head Screw
Hood Shield
#2 Phillips Screw Driver
Page 1 of 4
I-794
Rev. C
TM
Rubber Grommet
Drill w/1/8" bit