Installation Steps; Care And Cleaning - LUND Ventvisor Elite Instrucciones De Instalación

Installation Steps

Slide the visor into the window channel, beginning with
the rear flange.
front flange
3
With the visor in place insert a clip into the window channel behind the visors front and rear flanges.
mirror cap
5
Ensure the clips are fully seated inside the
window channel by pressing it into place with a
6
Rear Visors
rear
visor
8

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
rear flange
visor
clip
putty knife.
Repeat steps 1 thru 7 for the remaining visors.
clip
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
800-241-7219 • Visit us at lundinternational.com
© 2013 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Apply pressure to all flange edges to ensure proper
4
visor
mirror cap
Raise window slowly and leave up for 72 hours to secure
visor to window channel. Note: It may be necessary to
"jog" the window up to initially close it.
7
Lund International
Page 2 of 2
adhesion.
DO NOT SQUEEZE CLIP!
rear visor
x2
72
50°F / 10°C Min.
x2