Getting Started; Quality Control - HOMEDIAGNOSTICS TRUEresult Guia Del Usuario

Getting Started

The Meter turns on automatically when a Test Strip
is inserted into the Test Port or when " S " Button is
pressed (see Memory and Meter Set Up). Meter turns
off automatically when the Strip is released from the
Meter or after 2 minutes of non-use.
Meter comes with pre-set time, date and all testing
Alerts and Reminders off. Before using the Meter
for the first time or after a battery change, check the
time, date, Alerts and Reminders, and update as
needed (see Meter Set Up).
We recommend performing Control Tests for
practice before using your Meter for the first time to
test your blood. Control Tests should also be
performed:
• When using the System for the first time,
• Occasionally as you use the container of Test Strips,
• When opening a new vial of Strips,
• When Meter results seem unusually low or high, or
• Meter was dropped.
Quality Control Testing
To assure you are getting accurate and reliable
results, TRUEresult offers two kinds of quality
control tests. These tests let you know that your
TRUEresult System is working properly.
12