HOMEDIAGNOSTICS TRUEresult Guia Del Usuario página 15

Automatic Self-Test
An Automatic Self-Test is performed by the Meter
each time a TRUEtest Test Strip is inserted
correctly into the Test Port.
If after inserting a Test Strip properly in
the Test Port, the Full Display (no
missing segments) displays followed by
the Apply Sample Symbols, when the
Meter is working properly.
If an error message appears in the
Display, the Meter will not perform a
test. If an error message appears, see
Troubleshooting or call for assistance
(see cover for phone number).
Caution! If segments are missing in the Display
when Meter is first turned on, do not
use the Meter for testing. Call for
assistance.
13