LF Utilitech PRO 6324-CAM Manual Del Usario página 10

8. Setting the ALERT
Move the button to select the ALERT settings: Without ALERT, Message ALERT, Message &
sound ALERT.
9. Setting the MODE
•
TEST mode: Use this to test the PIR-sensor.
The parameters is default, reaction Light Level: 100%, continuous Light Level: 20%.
If you press
•
PIR mode: Activates the system when movement/people are detected.
Press to do more Security Level settings.
•
Light On mode: Allows the light to stay on permanently.
Under this mode, you can adjust Reaction Light Level.
Press to adjust Reaction Light Level.
10. Adjusting the Security Level settings
Under PIR mode:
• Press
• Predefined presets for your convenience: LOW security, MIDDLE security, HIGH security.
• When you want full control, you can set it to CUSTOM and define your own settings:
Sensor Activation Level:
Bright/Dark here is used to describe ambient light. This setting decides the lamp will work under
what brightness of ambient light.
Sensor Detection Distance:
Once people come into the distance you set, the light will work.
Activation Light Level:
The brightness when sensing the people. Adjust the brightness among 30% to 100%.
Activation Light Time:
You can select 1MIN, 3MIN, 10MIN or 15MIN.
After the time, the light will turn to standard brightness.
Continuous Light Level:
The brightness without people.
Adjust the brightness of lamp among 0% to 40%.
you will see the note "Please change the MODE setting".
in the top right corner, then enter the Security Level settings.
10