Installation Information - LF Utilitech PRO 6324-CAM Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INFORMATION

● CAUTION: To avoid water damage and the risk of electrical shock, the motion sensor controls
must be facing the ground when the installation is complete.
● NOTE: Do not connect this light fixture to a dimmer switch or timer.
● NOTE: Do not install motors, transformers, or fluorescent light fixtures on the same circuit with the
fixture.
NOTE: Do not install the unit near or above ventilation or heat extractors.
● NOTE: This fixture is designed for outdoor installation and should be mounted to a wall or eaves.
The detector is less sensitive to motion directly toward it and more sensitive to crossways motion.
Wall Mount
Eave Mount
Note:
Light fixture should be mounted as shown above when installed, depending on type of
installation.
PREPARATION
Before beginning to assemble or install lighting fixture, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble
the product.
●Estimated Assembly Time: 20 - 40 minutes (Installation time will vary depending on skill level
and existing wiring conditions. Estimated installation time assumes standard wall junction box and
supply wiring are already installed).
●Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, silicone
caulking adhesive, smartphone.
●Helpful Items (not included): step ladder.
●This fixture must be installed in an area with Wi-Fi coverage. Make sure available Wi-Fi has a
speed of at least 2 MB/s.
●It is recommended to install this fixture at a height of 8.2 ft.
4

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

0804001

Tabla de contenido