LF Harbor Breeze MAZON MZ44BNK3LR Manual Del Usario página 11

FINAL INSTALLATION
DANGER: To reduce the risk of serious bodily
3.
injury, DO NOT use power tools to assemble the
blades (G). If screws are overtightened, blades (G)
may crack and break.
Insert the blade (G) through the slot on the band of
the motor assembly (C). Align holes in blade (G)
with holes in plate on underside of motor. Attach the
blade (G) with blade screws (AA) and fiber blade
washers (BB). Then, tighten each blade screw (AA),
starting with the one in the middle. Repeat for
remaining blades (G).
Hardware Used
AA
Blade Screw
BB Fiber Blade Washer
Remove one motor plate screw (K) from motor
4.
plate preassembled on the underside of the motor
assembly (C) and partially loosen the other two
motor plate screws (K). Align slotted holes in fitter
plate (D) with loosened motor plate screws (K),
allowing male plug from motor assembly (C) to
come through hole in fitter plate (D). Twist fitter
plate (D) to lock. Re-insert the motor plate screw
(K) that was removed and securely tighten all
three motor plate screws (K).
5. Remove one fitter plate screw (F) from fitter
plate (D) and partially loosen the other two fitter
plate screws (F).
Connect male plug from motor assembly (C) to
female plug from fitter plate (D), matching up the
colors on the plugs for correct fit. Make sure plugs
connect tightly.
3 3
Band
x 9
x 9
4
Motor
Plate
I K
3 5
D
F
11
C
BB
AA
I K
Male Plug
Male Plug Female Plug
G
C
I K
D
C
F