BE SURE TO RINSE THE SHAVING BLADE AND DRY
THOROUGHLY BEFORE STORAGE
5.
Carefully lift the Blending Jar straight up to
remove. The Ice Chute is spring-loaded and
can be pushed up. If the Bending Jar is not easily
removed, rock gently and lift. Do not twist.
6.
Turn the Blending Jar upside down and unscrew the
Jar Base counter clockwise (to the left). Carefully
remove the Blending Blade, and Blending Blade
Figure 6
Sealing Ring.
WARNING: THE BLENDING BLADE IS SHARP.
HANDLE WITH CARE.
7.
To remove the Ice Melt Reservoir hold the unit still
and pull straight out on the handle.
8.
The Ice Reservoir Lid, Ice Reservoir, Shaving Paddle,
Ice Hopper, Shaving Blade Assembly Nut, Shaving
Blade, Blending Jar Lid, Blending Jar, Blending Blade,
Blending Blade Sealing Ring, Jar Base and Ice Melt
Reservoir can be safely washed in the top rack of your
dishwasher. Use only top rack. Failure to do so
will result in damage.
Do not place the aluminum ice shaving paddle in the
dishwasher as discoloration will occur.
9.
Use a damp cloth to clean the outside of the unit.
WARNING: UNPLUG UNIT BEFORE CLEANING. DO NOT USE
SOLVENTS. NEVER IMMERSE THE UNIT IN WATER.
10.
Clean the inside walls of the ice chute with a damp cloth
after every use.
Figure 7
Figure 4a
ICE
DEFLECTOR
Figure 5
Figure 6
Figure 7
-11-