Audio Setup - Lenco DVD-432 Manual Del Usuario

SYSTEM SETUP
Aspect Ratio
Use this option to select the aspect ratio.
Notes:
The image display ratio is related to the recorded disc format. Some disc can not display images
in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV,
black bars will appear on the left and right side of the screen. adjust the screen setting depending
on the type of the television you have.
TV System
Select the desired TV system.
Note: The DVD player setting should be matched to your TV set.
For more information of output format, refer to the instructions of your TV set.
Video Out
Select the desired video output format.
HD Resolution
After you set the video output to HD output, you can choose the resolution of HDMI output.
Note: the resolution must match with the supported resolution of your tv set

AUDIO SETUP

Select Audio in the setup menu, and display the Audio submenu.
Analog output
Analog out select 5.1CH or 2.0 CH(select down mix) audio output.
Note: This item is only for 5.1ch player.
Digital output
Adjust the audio output on Coaxial ports to work in harmony with the audio equipment
(e.g.receiver, amplifier) connected to the player.
Off Digital audio output is disabled.
PCM Transfer stereo 2 channels signals
8