KSIX SPARK Manual De Usuario página 3

Next: Press and hold the touch area of the right earphone for 2 seconds.
volume+: Touch the right earphone once gently.
volume- : Touch the left earphone once gently.
Calling
Answer a call: Touch the left or right earphone once gently.
Hang up: Touch the left or right earphone twice gently.
Dialing cancellation: During dialing, press the left or right earphone for 2 seconds.
Reject a call: Press the left or right earphone for 2 seconds.
Voice assistant
Touch the left or right earphone three times gently.
Reset
1) Delete the connection between the earphones and the phone.
2) Tap the left or right earbud 5 times and then alternating red and blue lights will flash. Once they turn off, the reset will be properly
completed.
3) It can be used after reconnecting with the mobile phone.
Charge
Earphones: Put the earphones into the charging box, this will automatically charge the earphone, and the earphone will display a red light
when charging.
Charging case: Use the type-c charging cable included in the package to charge the charging case.
Earphones indicator
No pairing: Red and blue lights flash quickly
Waiting to be paired: One blue light flash quickly
Paired successfully: The indicator light is off
Power on: Red and blue light up flash quickly for 1 second
Power off / Play / Pause / Standby: The indicator light is off
Incoming call: Blue light flashes twice every 3 seconds
Calling: The indicator light is off
Charging: Red light is always on
End of charging: The indicator light is off
Notes:
1） iPhones and some Android phones can support the
adjustment of phone volume if you need to use the
headphones to adjust the volume, but for some Android
phones, you can only adjust the volume of the earphone itself.
If you need to restore the default volume, put the earphones
in the charging case and take them out after the red light
turns on.
2） When holding the earphone, do not touch the touch panel
area of the earphone to avoid misoperation.