Saneo HLF-23R Manual De Instrucciones página 23

Cleaning the device
- Wipe the body of the unit with a soft cloth to remove dust.
You can clean the body of the appliance, the cover and the water
tank drawer with a soft sponge slightly moistened with warm
water and a mild detergent (such as dishwashing liquid). Rinse
with clean water and dry with a soft cloth.
- Do not allow water to enter the unit through the
ventilation openings.
- Do not use abrasive detergents or scouring sponges for
cleaning.
Cleaning the filter
- Remove the grille on the back of the unit with a screwdriver
and then remove the filter (see diagram on the next page).
- Wash the filter in clean water (you can use a mild detergent
and a soft brush if necessary), rinse it and put it back in its
housing when it is completely dry.
- Never use the device without the filter.
- For best efficiency, we recommend that you clean the filter
regularly. Clean it once a month.
Remove limescale from the bottom of the tray with a sponge.
Cleaning the water tank
- Turn off the power, remove the filter, then remove the water
tank and remove dirt from the tank using a damp towel with
a mild detergent. Then wash and rinse it with clean water and
wipe it with a dry cloth.