Publicidad
Weekly setting should be operated under the production is standby status.
Under standby status to press
1)
Click
Date, Date is D1-D7 day.
1
2) Click
Hours, Hours is 0-24 hour.
3) After click
Current Minutes, Minute is 0-59 minute.
Press and hold FAN or OSCILLATION button to achieve continues add or reduce setting. This allows for
precise timing setting.
2
Click Flame
one day or seven days.
3
Click Heater
for one day.
4
Click brightness
display will flicker, Click FAN and OSCILLATION (
display will flicker, click FAN and OSCILLATION (
5
Click speed
display will flicker, Click FAN and OSCILLATION (
You should return to step 2 if you want adjust different status for one day, can't enter next
step directly.
6
Press Timer
→
seconds
all recycle display. Displays the current time and can update the current time constantly.
7
Press and hold Flame
DATE setting, for example D1)
→
08:30
end up time 15:30
Press Heater
42MM9734REV.1
TIME AND WEEKLY SETTING
button to enter weekly function setting
button to confirm, 88 display will flicker, Click FAN and OSCILLATION (
button to confirm, 88 display will flicker, Click FAN and OSCILLATION (
button to confirm, 88 display will flicker, Click FAN and OSCILLATION (
button, 88 display will flicker, Choose weekly date from D1-D2-D3---D7,You can select either
button, 88 display will flicker, choose weekly thermostat, you can set different thermostat
button, 88 display will flicker, to choose the weekly to start up the operation time. 88
button, 88 display will flicker, to choose the weekly to end up the operation time. 88
button and hold 3 second to start weekly program. 88 digital tube will display hour for 5
display minute for 5 seconds→ display temperature for 5 seconds
button for 3 seconds to see about weekly setting. Press the 1st to see about
→
temperature
→
recycle operation.
button and hold 3 second to cancel weekly program under standby status.
) to adjust hour, after click time button confirm. 88
) to to adjust minute, after click time button confirm.
)to adjust hour, after click time button confirm.
→ u
→
ptime 08:30
end up time 15:30
28
:
) to adjust Current
) to adjust Current
) to adjust
→
display date for 5 seconds,
→
→ t
D2
emperature
→ 88
→
uptime
Publicidad
