Tripp-Lite U339-002 Manual Del Propietário página 6

Offline Cloning
3. Insert the 2.5" or 3.5" SATA replica hard
drive (the drive the cloned data will be
copied to) into the replica drive (Bay B) of
the docking station.
4. Turn on power to the docking station using
the ON/OFF button on the back of the unit.
The red Power LED will illuminate to indicate
power is being received. The red Drive LEDs
will illuminate to indicate a hard drive is
connected to the corresponding port, and
ready for cloning.
5. Press the Clone button twice, pausing for
several seconds after the first press, and
then release.
6. The 25% Progress LED will blink when the
cloning begins. The Progress LEDs will
illuminate blue to indicate the percentage of
cloning completed as the process continues.
7. When all the blue Progress LEDs are
illuminated solid blue, the cloning process is
complete.
6