Operating Instructions - Weston 24-1001-W Manual Del Usuario

OPERATING INSTRUCTIONS

1. Open the battery cover on the back side
of the Digital Control Display. Insert (1)
9V battery and replace the battery cover.
You can also connect the 9V AC adapter
to an outlet (Follow the outlet instructions
outlined in this instruction manual)
(FIGURE 1).
2. Place the scale on a level surface and
press the "ON/OFF" button to turn on
the scale. The Digital Control Display will
illuminate, displaying all controls. When
stabilized, it will display "0.00" (FIGURE 2).
3. Press the "MODE" button to change
the unit of measure (FIGURE 3).
Mode 1
(LB)
4. If the Digital Control Display does not display "0.00 LB / 0 LB 0 oz / 0.00
Kg", press the "TARE" button to reset the display to "0.00".
5. When the display shows
battery is running low and will need to be changed soon (FIGURE 4).
6
MODE
Mode 2
(LB:oz)
or "Lo", this is an indication that the
FIGURE 1
TIME
SET
TARE ON/OFF
FIGURE 2
FIGURE 3
Mode 3
(Kg)
FIGURE 4
Low Voltage