TECO TECOnnect Manual Del Usuario página 22

Unit of measure can be degrees Celsius or Fahrenheit.
The reset will restore the thermostat to its factory settings.
Possibility to change the name of the device.
NOTE: Both after the conversion from °C to °F and vice versa
and after resetting, the settings should be checked.
NOTE: Reset operation and degrees conversion can take up to
30 seconds to complete.
5.4.5 USER ACCOUNT
This page allows you to edit the user data and password.
5.4.6 CONTACTS AND INFORMATION
The contact information, the privacy conditions and the application version are
displayed.
5.4.7 LINK
Link to manufacturer's site.
5.5 CONNECT AND MONITOR MULTIPLE APPLIANCES
If there are multiple refrigerators, a module is needed for each of these. There is
no need to download the APP again.
Simply start the SETUP
Once the setup of the new device is complete, you can change the appliance to
control by clicking on the panel on the top right.
procedure for the new device, see paragraph 5.2.
EN-20