CONTROL PANEL
• Some functions described in this manual may not be applicable to your unit.
• Consult your nearest authorized dealer for further information.
• For normal operation, the
13
14
15
16
23
1
2
7
1
OFF/ON Button
2
Operation LED
3
Operation Mode Button
4
Quiet Operation Button
5
Indoor Unit Backup Heater Enabling Button
6
System Setting Mode Buttons
7
Timer Setting Group Buttons
8
Force Heater Mode Button
9
System Pumpdown Mode Button
10
System Status Check Mode Buttons
11
Heat Mode OFF/ON Indicator
12
Cool Mode OFF/ON Indicator
13
Tank Mode OFF/ON Indicator
CONTROL PANEL PREPARATION
Setting Current Day and Time
CLOCK
1. Press
.
2. Press
or
to set current day.
SET
3. Press
to confi rm.
4. Repeat steps 2 and 3 to set the current time.
4
ERROR
FORCE
PUMPDW
RESET
,
and
buttons are not in use.
12 11
22
26
TIMER
HEAT
TIMER
1
COOL
MONTUEWEDTHU FRI SAT SUN
TANK
ON
QUIET
OFF
HEATER
SOLAR REMOTE
FORCE
OPERATION
SETTING
TIMER
OFF/ON
CLOCK
6
24
25
OUTDOOR
ACTUAL
HEATER
2 3 4 5 6
BOOSTER
C
SETTING
STATUS
C
PUMPDW
WATER OUTLET
OFF /ON
STATUS
SET
CHECK
MODE
SEARCH
SELECT
QUIET
HEATER
ERROR
CANCEL
RESET
FORCE
PUMPDW
27
4
14
Quiet Operation OFF/ON Indicator
15
Backup Heater Enabled/Disabled Indicator
16
Force Heater Request OFF/ON Indicator
17
Backup Heater Actual Operation (OFF/ON) Indicator
18
Booster Heater Actual Operation (OFF/ON) Indicator
19
System Setting Mode OFF/ON Indicator
20
System Status Check Mode OFF/ON Indicator
21
System Pumpdown Mode OFF/ON Indicator
22
Timer/Clock Setting Display
23
External Thermo Controller Connected Display
24
Outdoor Ambient Temperature Display
25
Water Outlet Temperature Display
26
Solar Display
27
Error Reset Button
Notes:
• The current day and time need to be set when:
- The power is turned on for the fi rst time.
- After a long time has elapsed since the power was last
turned on.
• The current time that has been set will be the standard
time for all the Timer operations.
17
18
19
20
21
3
10
5
9
8