Cequent Performance Products 75107 Instrucciones De Instalación

Hitch Shown In Proper Position
Equipment Required:
Fastener Kit: F75107
Wrenches: 7/8"
Drill Bits: None
Frame Rail
j
Carriage Bolt ½-13 x 1-3/4" GR5
Qty. (6)
k
Qty. (2) Spacer Block ¼ x 1-1/2 x 3
l
Qty. (2) Spacer Block ¼ x 1-1/2 x 2
1.
2.
3.
4.
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
©
1999, 2000, 2002, 2007, 2008, 2009, 2014 Cequent Performance Products – Printed in Mexico
Installation Instructions
Frame Rail
Fascia
jmno
Loosen spare tire.
Raise hitch into position.
Install fasteners as shown.
Tighten spare tire.
Tighten all ½-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Nissan Xterra
Do Not Exceed Lower of Towing Vehicle
Hitch type
Weight Distributing
Weight Carrying
Ball Mount
Wiring Access Location: SUV1, SUV2
jlno
jkno
m
Qty. (2) Spacer Block ¼ x 1 x 2
n
Conical Toothed Washer ½"
Qty. (6)
o
Qty. (6) Hex Nut ½-13 GR2
Sheet 1 of 3
Part Numbers:
78193 UHAUL
Manufacturer's Rating or
Max Gross
Trailer WT (LB)
5500 (2497 Kg.)
3500 (1589 Kg.)
Accessory Rating
N75107 05-13-14
Form: F205 Rev A 5-6-05
75107
44717
Max Tongue
WT (LB)
550 (250 Kg.)
350 (159 Kg.)
C
Rev. E