Product Overview; Led Indication - Smanos MD9260 Manual De Usuario

Detector de movimiento dual-tech con energía solar
Ocultar thumbs Ver también para MD9260:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
EN
Introduction
MD9260 is a solar-powered motion detector utilizing a single
passive infrared element and microwave technology. It consists of
digital dual-core fuzzy logic infrared control chip and intelligent
analysis which could effectively identify interference signals from
body movement signals so as to reduce false alarms. The detector
is battery powered and kept re-charging by the solar panel to
save energy. Unique housing material and structure improve its
waterproof level for outdoor use. Only after being connected
successfully with alarm system, the detector can work normally.
Features
1. Accurate detection
It has microwave and infrared dual detections to prevent false
alarms.
It consists of digital dual-core fuzzy logic infrared control chip and
intelligent analysis which could effectively identify interference
signals from body movement signals.
With automatic temperature compensation and anti-air turbulence
technology, it easily adapts to environmental changes.
2. Outdoor use
It adopts ABS and anti-UV materials for outdoor use with IP65
rating.
3. Energy saving
Rechargeable by solar power.
Energy saving mode to reduce battery charging times, and
extending battery life.

Product Overview

Solar Panel
LED Indicator
Detection Lens
Detector

LED Indication

LED Status
Red and orange LEDs flash
Self-testing
continuously for 1 min
Red LED flashes once
Infrared is triggered
Orange LED flashes once
Microwave is triggered
Both infrared and microwave
Red and orange LEDs flash once
are triggered, the detector
at the same time
sends alarm signal.
Red LED flash 3 times every
Low battery. Please install on
12 seconds
place with sufficient sunlight
EN
Fixing Screw
Base
Installation Bracket
Meaning

Publicidad

Tabla de contenido
loading

Tabla de contenido