Dorel DA7967-1 Manual Del Usuario página 16

TWIN OVER TWIN UPHOLSTERED BUNK BED
Instructions for converting the bunk bed into two single beds
Only Headboard panel with fabric
need to change facing inside.
1. Remove the ladder and all the guardrails.
2. Remove the top bunk from the lower bunk with another person.
3. Disassemble the side rails from all headboards (top and lower bunks).
4. Remove the screw on headboard posts and turn the panel showing fabric side inward, and then tighten the
screws as shown.
5.Re-assemble the headboards (with tall posts) and footboards (with short posts) to side rails.
Note: Switching the headboards will allow the two single beds to be identical (the headboards
will have taller posts and the footboards will have the shorter posts).
DA7967-1 / DA7967-2
Headboard panel with fabric
facing inside.
Footboard panel with fabric
facing outside.