Andis ORL Instrucciones De Uso Y Cuidado página 3

appliance where it may be 1) damaged by an
animal or 2) exposed to the weather.
12. The battery in this trimmer is designed to
provide maximum trouble-free life. However,
like all batteries, it will eventually wear out.
Do not disassemble trimmer and attempt to
replace battery.
13. Batteries can be harmful to the environment if
disposed of improperly. Many communities
offer recycling or battery collection. Contact
your local government about disposal practices
in your area.
14. When discarding old batteries, cover battery
terminals with heavy-duty adhesive tape to
prevent short circuits. WARNING: Do not
attempt to destroy or disassemble trimmer
or remove any of its components. Also, never
touch metal terminals with metal objects
and/or body parts, as short circuit may result.
Keep away from children. Failure to comply
with these warnings could result in fire or
serious injury.
15. This appliance is only to be used with the
power supply unit provided with the appliance.
16. This appliance is only supplied at safety extra
low voltage corresponding to the marking on
the appliance.
17. Keep the appliance dry.
SAVE THESE INSTRUCTIONS
4
UNIVERSAL AC/DC POWER ADAPTER
The unit/charging stand is equipped with a universal AC/DC power adapter.
Interchangeable input plugs are included for use in most countries around
the world (Figures A-E). Plugs may vary by model.
REMOVING INPUT PLUG:
1. Unplug AC/DC power adapter from wall outlet.
2. While pressing down on button located on input plug, gently push up on
plug until it releases from power adapter (Figure F).
REPLACING INPUT PLUG:
1. To replace input plug, align tabs on the AC/DC power adapter with slots
on input plug (Figure F).
2. Gently push input plug into power adapter until it snaps into place.
OPERATING INSTRUCTIONS
• The battery is not intended to be replaced by the user.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when
removing the battery.
• The battery is to be disposed of safely.
CHARGING TRIMMER USING CHARGING STAND
The AC adapter is intended for use with Andis model ORL lithium-ion
trimmer battery with a rated capacity of 4.5V
and AC adapter from the carton. Plug the AC adapter into a 120V AC
outlet, or according to your local power standards. Plug the adapter cord
into the receptable on the back of the charging stand (Figure G). Place
trimmer in the charging stand. The ON/OFF switch on the trimmer must be
in the OFF position for the battery to charge. The blue light on the trimmer
will fade in and out while charging. Note that the trimmer can be removed
at any time during the charging cycle without harming the trimmer or
battery. Once the battery is fully charged, the light on the trimmer (Figure
H) will turn solid blue.
The trimmer has not been charged at the factory. Please charge the
trimmer for 2 hours before the first use for maximum performance.
You can keep the trimmer plugged into the charging stand or adapter when
not in use. The charging stand or adapter will maintain the battery at full
charge. We recommend that the charging stand or adapter be unplugged if
the trimmer won't be used for seven or more days.
1.2A. Remove the trimmer
5