Horizon Global 24966 Instrucciones De Instalación página 6

Reinstall lower fascia and wiring clips – reinstall the lower fascia
8.
aligning tabs in lower fascia with upper fascia. Reinstall the (5)
wiring clips into fascia tabs above the bumper beam.
9. Trim center underbody panel – measure, mark, and trim the center
underbody panel.
5-1/4"
©2017 Horizon Global™ Corp - Printed in Mexico
4-1/2"
8. Continued:
Reinstall the (2) screws at outer edge of fascia.
Reinstall underbody panels – reinstall the (3) underbody panels
10.
using the (14) push-type rivets and the (3) threaded panel
fasteners.
Sheet 6 of 18 24966NP 8-10-17 Rev. A