Alcad 912-MS Serie Manual De Instalación Y Programación página 20

2.1 Description of the FA-310 and FA-311 power supply
1- Mass connection
2- Indicator of correct operation
3- Overload indicator
4- Power / Control output connector
5- Connection cable to the mains
6- Supply / Control cable
7- List of technical characteristics
2.2 Description of MS-545 modulators
8- Infrared receiver
9- Programming indicator
10- Program mode switch
11- Infrared emitter
12- Correct HF output channel Indicator
13- Audio and video input miniDIN connector
14- Power / Control output connector
15- Level regulator of the output signal
16- F-connector for RF signal input from upstream modulator
17- F-connector for RF signal output to downstream modulator or
amplifier
18- Mass connection
19- Bridges (41,5 mm)
20- List of technical characteristics
2.3 Description of the PA-720 amplifier
21- Signal output F connector
22- F-connector for output signal testing at -30 dB
23- Operating indicator
24- Power / Control output connector
25- Level regulator of the output signal
26- Input F connector from the transmodulators
27- F-connector for the extension signal input
28- Mass connection
29- 75Ω F loads
30- F-connectors
31- List of technical characteristics
Serie 912-MS ENG - 19