EAS ELECTRIC NT-03A Manual De Instrucciones página 10

1.1.2 Button function of remote controller
① When pressing this key, the remote controller switches by "on, off, on" circularly.
（1） ON/OFF
② When the first power on, the working state is set by default: setting temperature 25℃ (77℉),
automatic mode, automatic fan speed, internal and external pendulum wind, no TURBO, no
sleep, no timer, no lock).
③ When the power on is not the first time, the state before shutdown is recovered. After
shutdown, the sleep, TURBO, ECON and timer functions will be canceled.
（2） Mode
① When pressing this key, the remote controller switches by "automatic, cooling,
dehumidification, fan, heating, automatic" circularly.
② The dehumidification mode is locked at 25℃ and the temperature can not be adjusted. The
internal pendulum wind stays unchanged according to the state before switching, but the
external pendulum wind is forced to close.
① Temperature setting: when pressing this key, the setting temperature will be reduced by 1. The
（3） Temperature reduction ▼
temperature of centigrade model will be reduced progressively by "32℃, 31℃, ......, 17℃,
16℃". The temperature of Fahrenheit model will be reduced progressively by "90℉, 89
℉, ......, 62℉, 61℉". When pressing this key in dehumidification and fan mode, the
temperature will not change.
② In the clock setting state (the clock icon will flicker to show the prompt), this key is used to set
the clock time.
③ Keep pressing will continuously change the temperature.
（4） Temperature addition ▲
① Temperature setting: when pressing this key, the setting temperature will be added by 1. The
temperature of centigrade model will be added progressively by "16℃, 17℃, ......, 31℃, 32℃
". The temperature of Fahrenheit model will be added progressively by "61℉, 62℉, ......, 89
℉, 90℉". When pressing this key in dehumidification and fan mode, the temperature will not
change.
② In the clock setting state (the clock icon will flicker to show the prompt), this key is used to set
the clock time.
③ Keep pressing will continuously change the temperature.
（5） Up and down swinging (External pendulum wind)
① Pressing this key in the dehumidification mode, the external pendulum wind is forced to close.
② Pressing this key in the other modes, the external pendulum switches by "swing, fixed wind,
swing" circularly.
9 V.1