EAS ELECTRIC EASCOMPACT Instrucción De Montaje página 10

Operating instructions
Istruzioni per l'uso
Mode d'emploi
Instrucciones de uso
Instruções de operação
Maintenance of the system
The system must be inspected visually, once a year, for any damage, leaks and contamination. Condensate can form in the sys-
however after a few hours exposure to sunlight.
AR glass for short), the following points in particular should be observed.
Use ...
• Clean lifting gear, suction holders, and gloves
• A cover for the glass vacuum lifter (material: Tyvek; replace when dirty)
• Do not use the glass surface as a place to deposit installation material or other objects!
ATTENTION:
Clear the AR glass only with plain water or slightly soapy water!
its full performance!
AVOID ...
•
• Using leather gloves
• Contact with silicone, oil, grease, and any other thick, hydrophobic substances
•
• Scouring powder, and fabrics containing metal yarn
• Mechanical cleaning methods such as scrubbing, stripping, and high-pressure cleaning
10
30°
EN
20°
5-45°
V.1