Final Assembly Instructions - LF Allen + Roth EASTVIEW LP8074DLAZ Manual Del Usuario

WIRING INSTRUCTIONS
5. After connections have been made, turn leads
upward and carefully push power supply wire
leads into the outlet box, with the white and
green leads to one side of the box and the
black leads toward the other side.

FINAL ASSEMBLY INSTRUCTIONS

1. Remove one of the two preassembled
shoulder screws in the hanger bracket (B).
Loosen the second shoulder screw without
fully removing it. Rotate ceiling canopy (D) so
second shoulder screw moves into the small
opening of the keyslot. Tighten shoulder
screw. Re-install the previously removed
shoulder screw to fully assemble ceiling
canopy (D) to hanger bracket (B).
WARNING
To avoid possible fire or shock, make sure the
electrical wires are completely inside the canopy
housing and not pinched between the housing
and the ceiling.
2. Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twist-lock feature.
5
1
2
E
13
Lowes.com/allenandroth
all
D