Carton Contents; Fitting The Handle - SNOWJOE SUNJOE MJ504M Manual Del Operador

Unpacking

Carton Contents:

• Reel mower body
• Upper handle
• Middle handle bar (2)
• Lower handle
• Handle knob and bolt (6)
• Paper test strips (20)
• Hex wrench
• Manual with registration card
1. Carefully remove the manual reel mower and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new manual reel
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly

Fitting the handle

NOTE: Do not tighten the knobs completely until assembly is
complete.
1. Secure the two middle handle bars to the upper handle
using the first set of knobs and bolts provided. Tighten the
knobs on each side to ensure a secure fit (Fig. 1).
Fig. 1
Upper handle
Middle
handle
bar
customer service center at
®
Knob + bolt
2. Attach the upper and middle handle assembly to the lower
handle using the remaining knobs and bolts provided.
Tighten the knobs on each side to ensure a secure fit
(Fig. 2).
Fig. 2
Bolts
Knobs
3. After assembling the handle, line up the holes at the lower
end of each handle arm with the short posts that extend
from the side plates of the mower base (Fig. 3).
Fig. 3
Post
5
Middle
handle
assembly
Lower handle
Handle bars