SNOWJOE SUNJOE MJ24C-14-XR Manual Del Operador página 10

2. Join the upper handle frame to the lower handle frame
using the knob, washer and bolt provided (Fig. 5).
Repeat on the opposite side.
Fig. 5
Bolt
NOTE: The upper handle is equipped with two sets of
holes on each side of the frame, however, only one set is
necessary to secure to the lower handle (Fig. 6). Simply
select your preferred height, and secure as shown (Fig. 5).
Fig. 6
3. Secure the power cable to the lawn mower by using the
cable clips.
Grass Collection Bag Assembly + Fitting
1. Fit the support rod into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine (Fig. 7).
Upper handle
Washer
Knob
Upper handle frame
Shorter handle
setting
Longer handle
setting
Fig. 7
Plastic
cover
Support rod
2. Place the protective plastic straps onto the support rod
(Fig. 8).
Fig. 8
Protective
plastic
straps
Support rod
3. Lift the ejector flap with one hand. With the other hand,
hold the grass collection bag by the handle and hook it in
from above (Fig. 9).
Fig. 9
Grass collection
bag
10
Ejector flap