Electrolux TRIMKITSS1 Hoja De Instrucciones página 8

12. Trim Kit Leveling (See Figure 16)
(Single and Dual Installations)
a. To raise front of unit, turn leg leveler to left with
adjustable wrench to fit 1-¼" hex.
b. To raise back of unit, adjust bolt clockwise with
3/8" socket or flat head screwdriver.
To raise or lower door,
adjust 7/16" bolt.
To raise back of
unit, adjust bolt
clockwise.
Figure 16
13. Hinge Adjustment (See Figure 16)
(Single and Dual Installations)
a. The bottom hinge is designed to make final
minor adjustments for door to door and door to
cabinet alignment.
b. Hinge will move side to side 3/32" and raise
up 1/8".
Use a 7/16" socket or open end wrench to raise or
lower the door.
Use a 3/8" socket and a Phillips screwdriver to loosen
bottom hinge. Shift door left or right, then retighten
screws and bolts.
14. Side Trim Attachment to Kitchen Cabinets
(Single and Dual Installations)
a. Fasten bottom of side trim with screw.
b. Fasten screws to top trim. (See Figure 18).
3/8" Bolts
Phillips Head
Screws
Leg Leveler
15. Kick Plate Attachment
(Single Unit)
(Dual Unit)
©2013 Electrolux Home Products, Inc.
INSTRUCTION SHEET
(See Figure 17).
Figure 17
Figure 18
Attach the kick plate to the cabinet
with two (2) screws. (See Figure 19).
Attach the kick plate to the cabinet
with four (4) screws. (See Figure 20).
Figure 19
Screws
Figure 20
Instruction Sheet A00343901
Screws
11.04.13