AVM FRITZ!WLAN Repeater 310 Manual Del Usuario página 3

LEDs
The LEDs show the operating status:
on
Quality of the wireless
radio signal
Power FRITZ!WLAN Repeater 310
is ready for operation
Wireless LAN function
WLAN
enabled
all
fl ashing
Connection to the wireless access point is interrupted
• The FRITZ!WLAN Repeater 310 is being started.
• Updating FRITZ!OS
• WPS in progress; fl ashes fast: WPS was aborted
• Enabling Mesh WiFi
• Adopting the wireless LAN settings
Loading factory settings
4
WPS Button
With the WPS button you operate the FRITZ!WLAN
Repeater 310:
Press the WPS button
Initiate WPS / Enable 1 second
Mesh WiFi
Connect with another 6 seconds
access point
Factory Settings 15 seconds
Security
• Operate the FRITZ!WLAN Repeater 310 in
a dry place that is free of dust. Provide for
suffi cient ventilation.
• FRITZ!WLAN Repeater 310 is intended
for indoor use only. Never let liquids get
inside the housing.
• Insert the FRITZ!WLAN Repeater 310 into
an electrical outlet that is easy to reach.
• Do not open the FRITZ!WLAN Repeater 310
housing.
• Unplug the FRITZ!WLAN Repeater 310 from
the outlet before cleaning.
5