Beninca IRI.KPAD.C Manual Del Usuario página 16

1) IRI.KPAD.C
1.1) DESCRIPTION
Programmable Digital Keypad to control gate and similar mechanisms. It can be used in two different ways:
STAND-ALONE MODE:
Requires a power supply of 12/24 Vac/dc, avails of 1 N.O. contact to command a control unit or other device.
Entering a valid numerical code sends a code that activates the output contact.
If necessary, you can use an auxiliary relay for direct control of a mains voltage device. In this case, ensure the type of relay used
is compatible with the power supply voltage of IRI.KPAD. Refer to Fig. 10/11.
REMOTE MODE:
Requires connection to a BE.REC device (Fig.12). All the codes are saved in the BE.REC device memory. Entering a valid numerical
code sends an encrypted code to the BE.REC receiver, the code, if validated, leads to relay 1 or 2 switching according to the
setting. As a result, the use mode of the IRI.KPAD.C guarantees greater safety and flexibility compared to use of the built-in
N.O. contact.
Refer to Fig.12 for connection to the BE.REC* device.
Use of the BE.REC receiver enables use of certain advanced functions described in the BE.REC manual:
- insertion of codes to scale
- deletion of a code
- deletion of all codes with a specific initial digit
- re-enabling of all codes with a specific initial digit
- re-enabling of all disabled codes
* Install BE.REC in a safe place, not accessible from outside
Other characteristics:
• LED back-lighting.
• Code composition from 4 to 9 digits.
• Number of keys from 0 to 9 plus confirmation key #.
• Possibility of setting the access password, the codes to scale and elimination of individual codes.
• Buzzer for sound indications.
16