Bissell POWERGLIDE 1305 Serie Guia Del Usuario página 6

PowerBrush Switch
1
Turn vacuum ON before
turning ON PowerBrush.
Press brush side
of button to run
PowerBrush.
Adjusting the Variable Suction
1
Locate Variable Suction Control Valve.
NOTE: Some frieze carpets have long delicate fibers or threads that may be
damaged by rotating brush. Turn off the PowerBrush when cleaning this and
other similar types of carpet.
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
www.BISSELL.com
6
2
PowerBrush
ON / OFF
Power
PowerBrush will not run
when vacuum is locked in
upright position.
If debris is entangled in
brush, brushroll automati-
cally turns off. Unplug cord,
remove debris, then press
red Brush Reset button.
Upright
Locked
in Place
Reclined
In Use
2
suction control
Twist Valve - Marker
FULL moves to indicate
suction level
suction control
Twist Valve - Marker
FULL moves to indicate
suction level
Twist counter-clockwise to reduce suction.
If debris is keeping vacuum
from operating, unplug cord,
remove debris, and then
press Brush Reset button
to resume vacuuming.
REDUCED
REDUCED
Full
Suction
Reduced
Full
Suction
Suctio
Reduced
Suction