Tabla De Contenido; Safety And Warnings; Usage; Set Up And Installation - JYSK SLANGERUP 3600272 Manual De Instrucciones

GB : TABLE OF CONTENT
1. SAFETY AND WARNINGS
2. USAGE
3. SET UP AND INSTALLATION
4. OPERATION
5. MAINTENANCE AND DEFECTS
6. TECHNICAL DATA
7. PARTS
8. ASSEMBLY DIRECTIONS
9. DECLARATION OF CONFORMITY

1. SAFETY AND WARNINGS

This table complies with the prescribed safety regulations. Inappropriate use may cause damage
to persons and table. Please read the operation manual prior to using the table.
It provides you with important information about safety, use, installation and maintenance of the table,
and thus protecting you and your children and avoiding damage on the table. Please guard this operation
manual and pass it on to any future owner !
WARNING : FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUC -
TIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.

2. USAGE

- The electromotive, height-adjustable tables are designed for workstations in dry work environments only
( 0 - 40° C ; 20 - 90 % relative humidity ) . The table height is infinitely adjustable, so that it can be set to the
most ergonomically suitable working level.
- They have not been designed for other purposes than those included in this manual, e.g. they are not to be
used in areas of high humidity or dampness, nor for lifting people. Any other use is at one's own risk !
- Do not crawl, lie or move around under the table frame, and do not sit or stand
on the table frame.
- CHILDREN should only use the table when supervised by adults.
- Liability : The manufacturer accepts under no circumstances warranty claims or liability claims for damages
arising from improper use or handling of the table frame other than that described in this operation manual.

3. SET UP AND INSTALLATION

When the table has been assembled ( see assembly instructions in CHAPTER 8 ) the adjustable feet are installed
so that the table is level and does not shift. Then the table is connected to the 100 - 240 VAC outlet and the
table is ready for use.
- Make sure that no cables can get jammed.
- Place the table in a safe distance from window frames, radiators, furniture etc. so that people
do not get stuck.
- Do not place any objects above 55 cm underneath the table.
- When moving the table after it has been assembled, the table top needs to be removed. The table CANNOT
be lifted by the table top. The desk need to be lowered to minimum height before moving.
IMPORTANT NOTES !
Prior to installation, use and main-
tenance of the table frame, any
installer and any user of the table
and operation manual carefully,
so as to gain a complete under-
2/66
must study this assembly
standing of its contents !