Operation; Maintenance And Defects; Technical Data; Parts - JYSK SLANGERUP 3600272 Manual De Instrucciones

4. OPERATION

UP / DOWN operation :
Push "Up" button to move table up and "Down" button to move table down.

5. MAINTENANCE AND DEFECTS

– The table does not require any maintenance by usage as described in chapter 2 in the directions for use.
– The table is only to be maintained with a damp cloth.
– In the event of the occurrence of jarring sounds during operation, STOP using the table.

6. TECHNICAL DATA

Frame, materials :
Tabletop material:
Weights
:
Width :
Depth
:
Height
:
V ( speed ) :
Duty cycle
:
Operation
:
Voltage
:
Standby consumption :
Max. working load
:
Above specifications may vary depending on local temperature, humidity and input voltage.

7. PARTS

See page 59 - 60.

8. ASSEMBLY DIRECTIONS

See pages 61 - 65.

9. DECLARATION OF CONFORMITY

We hereby declare, under our sole responsibility that the following products :
– Sit and stand table product type SLANGERUP.
is in accordance with :
– Directive 2006 / 42 / EF of The European Parliament and of the Council of 17 May 2006 on machinery
and on changes of directive 95 / 16 / EF
With reference to the above please be aware that :
– the sit and stand table is considered a machine and
– the sit and stand table may not be used until it has been assembled and installed according
to the instructions.
Produced for :
JYSK A / S
Sødalsparken 18 · 8220 Brabrand
DK- Denmark
Tlf.: + 45 89 39 75 00 · Fax : 89 39 75 01
Steel, powder lacquered
Chipboard with melamine
36 kg
160 cm
80 cm
68 - 118 cm
~ 25 mm / sec. – depends on load
10 % by 50 % of max. working load on frame or max. 2 min. continuously
Micro switches
|
200 -240 VAC 50 / 60 Hz
< 0,15 Watt
40 kg
3/66
DOWN button
Manufacturer :
2- connect ApS
Lene Haus Vej 9 · 7430 Ikast
DK- Denmark
Tlf.: + 45 97 15 77 77 · Fax : +45 97 15 66 44
www.2-connect.dk
UP button