Publicidad
Idiomas disponibles
Idiomas disponibles
For the Plumber
Para el instalador
White plastic spring retainer cap removal and replacement (continued)
Diverter spring retainer removal (continued)
7
Attach white plastic plate of the trim kit to the pressure
balance valve using two screws. Metal diverter sleeve will fit
through hole in plate.
8
Remove second black plastic mud guard from diverter stem.
Snap the metal escutcheon plate of the trim kit on to the white
plastic plate. Metal diverter sleeve will fit through hole in plate.
9
Locate metal diverter sleeve and knob in a plastic bag in trim kit.
Screw the metal knob to the exposed metal diverter sleeve.
Unscrew metal diverter sleeve from knob. Keep both parts ready
for installation.
Dear Customer,
You have purchased a high-quality product, and to maintain its beautiful appearance for a long time to come, we suggest
that you care for it as follows:
Chrome, velvet chrome and colour coated surfaces are sensitive to cleaning agents containing acids or abrasives as well
as abrasive sponges.
Important!
Colour coated surfaces require extra care during installation and use. Slight colour variations can occur with colour coated
faucets as a result of unavoidable process variations.
Maintenance:
Dirt and surface calcination are best removed with soapy water, followed by rinsing with plain water and drying. Avoid
exposure of colour coated surfaces to disinfectants or cleaning agents containing alcohol, and treat such surfaces as
described above.
Careless treatment of faucets invalidates in2aqua guarantee provisions.
7
8
9
11
11
Publicidad
