Descargar Imprimir esta página

Behringer EUROPORT MPA40BT-PRO Guia De Inicio Rapido página 5

Ocultar thumbs Ver también para EUROPORT MPA40BT-PRO:

Publicidad

Idiomas disponibles

Idiomas disponibles

16
EUROPORT MPA40BT-PRO/MPA40BT
EUROPORT MPA40BT-PRO/MPA40BT Getting started
Step 3: Getting
(EN)
Set up the MPA40BT-PRO/MPA40BT in
your chosen listening location.
started
Connect the MPA40BT-PRO/MPA40BT to
a power outlet by using the included IEC
power cable.
Turn all LEVEL knobs and the
MAIN LEVEL knob down to the full
counter-clockwise setting.
Connect all analog microphone,
instrument, and/or RCA cables to their
respective input jacks.
Power up the MPA40BT-PRO/MPA40BT
by pressing the POWER switch to the
"on" position.
If you are using BEHRINGER wireless
microphones, plug the wireless dongle
into the WIRELESS SYSTEM USB input.
The WIRELESS SYSTEM LEDs will light up when the
wireless microphones become active.
To pair a Bluetooth device with
the MPA40BT-PRO/MPA40BT,
follow these steps:
• Press and hold the BT/AUX PAIRING BUTTON until
the LED fl ashes quickly.
• Open Bluetooth in your mobile phone,
MP3 player or other Bluetooth equipment to
pair and connect.
• In your Bluetooth device, enter the PIN code: 0000
(Bluetooth version 2.0 and above will not require
a PIN code).
• When the LED lights solid, you can begin playing
music from your Bluetooth device.
17
Quick Start Guide
While playing music from your Bluetooth
If you have an instrument plugged into
device, turn the BT/AUX LEVEL knob to
the MIC 1 or MIC 2 channels, play the
about the 50% position.
instrument and slowly rotate that
channel's LEVEL knob clockwise until you fi nd an
acceptable level.
Slowly rotate the MAIN LEVEL knob
clockwise until you achieve a
comfortable listening level.
If you have an instrument or other
external sound source plugged into the
iPOD/AUX RCA jacks, adjust the volume
While speaking into each microphone,
on the instrument or sound source.
slowly rotate the MIC 1 and/or MIC 2
LEVEL knobs clockwise until you fi nd a
Balance all of the audio channels against
clean, clear sound. If a microphone signal sounds
each other by adjusting each channel's
distorted, rotate the LEVEL knob slowly counter-
respective LEVEL knob until you fi nd an
clockwise until the sound cleans up.
acceptable mix.
Adjust the BASS and TREBLE controls if
the overall sound needs more low or
high frequencies.
Make fi nal adjustments to the MAIN
LEVEL knob.
Guitar

Publicidad

loading

Este manual también es adecuado para:

Europort mpa40bt