Berker 7531 40 12 Manual Del Usuario página 14

GB
D
Slide the cap with the bus wires at the bottom over the bus
terminal (fig. D) until it is heard to engage.
To remove the cap, push sideways and withdraw (fig. E).
26
Cap
E
Technical characteristics
instabus EIB
Supply voltage
Power consumption
AC 230 V supply typically
DC 24 V supply typically
instabus EIB connection
Mains connection
Ambient temperature
Storage temperature
Installation width
Schwitching capacity of outputs
AC 230 V typically
DC 24 V typically
Technical specifications subject to change
: 21 - 32 V DC
: typically 150 mW
: AC 110V~ (-10%)...240V~ (+10%)
50/60 Hz
: DC 24V... ± 10%
: instabus connecting terminal
: screw terminals
0.5 – 4 mm² single and stranded wire
without ferrule or
0.5 – 2.5 mm² stranded with ferrule
: -5 °C ... +45 °C
: -25 °C ... +70 °C
: 72 mm (4 pitch)
: 6 A
: 6 A
GB
27