Before Using; Control Panel - Infiniton FRD-83IX Manual De Usuario

Operation

Before Using

Starting and function setting

Control panel

Remove all packages, including the foam backing at the bottom of
refrigerator and the tapes fixing accessories in the box.
Place the refrigerator to a proper position, and adjust the feet to level.
It is better to clean the refrigerator before use.
Remove the film: There is a layer of transparent film on the panel of
our product, which can protect products from being scratched in the
process of production and transportation, and you can choose to
reserve or remove the film as needed.
Place the refrigerator and adjust to level, clean it, let the refrigerator
stand for above 2 ~ 6 hours, and then power on to ensure that the
refrigerator can operate normally.
Starting
Connect the power cord, and turn on the power switch.
Upon startup for the first time, the screen will display respective set
temperature values (the temperature of refrigerating chamber is set
as 5℃,temperature of freezing chamber -18℃)
Function setting of LED display
The default mode is energy saving upon startup: The screen displays
for 20 s and then goes off.
This mode to save energy and prolong the service life of LED lights.